文章摘要
引用本文:赵万良1,2,王伟1,2,齐轶楠1,2,荣义杰1,2,李绍良1,2.半球谐振陀螺控制电路频率跟踪精度提升方法[J].导航与控制,2017,(3):50-55 本文二维码信息
二维码(扫一下试试看!)
半球谐振陀螺控制电路频率跟踪精度提升方法
Approach to Improve the Frequency Tracking Accuracy of the HRG Control Circuit
  
DOI:
中文关键词:  半球谐振陀螺  星载惯性敏感器  频率跟踪精度  控制电路  A/D转换
English Keywords:hemispherical resonant gyroscope (HRG)  satellite borne inertial sensor  frequency tracking accuracy  control circuit  A/D convertor
基金项目:
作者单位
赵万良1,2 1.上海航天控制技术研究所,上海 201109
2. 上海惯性工程技术研究中心,上海 201109 
王伟1,2 1.上海航天控制技术研究所,上海 201109
2. 上海惯性工程技术研究中心,上海 201109 
齐轶楠1,2 1.上海航天控制技术研究所,上海 201109
2. 上海惯性工程技术研究中心,上海 201109 
荣义杰1,2 1.上海航天控制技术研究所,上海 201109
2. 上海惯性工程技术研究中心,上海 201109 
李绍良1,2 1.上海航天控制技术研究所,上海 201109
2. 上海惯性工程技术研究中心,上海 201109 
摘要点击次数: 238
全文下载次数: 301
中文摘要:
      半球谐振陀螺控制电路的控制精度直接影响半球谐振陀螺仪的输出精度,而频率跟踪精度又直接影响了半球谐振陀螺控制电路的精度。传统的半球谐振陀螺数字控制电路采用过零比较的方法计算陀螺幅点信号的频率,此方法易受地线毛刺信号的干扰,频率跟踪精度不高。介绍了采用A/D转换采集数据估算陀螺幅点信号频率的方法,并对各种方法进行了优缺点比较,提出选用建议。这些方法既提升电路抗干扰能力,又大幅提升了频率跟踪精度,还省去了过零比较电路。分析及测试结果表明,采用该频率跟踪方法,半球谐振陀螺的频率跟踪精度可达0.002Hz,可大幅提升半球谐振陀螺控制电路的精度。
English Summary:
      The accuracy of the hemispherical resonant gyroscopes (HRG) is affected by the control circuit accuracy directly, and the control circuit accuracy is affected by the tracking frequency accuracy. The frequency of the gyroscopes amplitude is calculated by the zero-cross detection in the traditional HRG control circuit. Effected by the undesired signal noises from the ground electrode, the frequency tracking is not accurate. The method to estimate the resonant frequency by the A/D convertor was proposed in this paper. And the different solutions following this method are compared to show their merits and demerits. These solutions, not only increase the interference immunity of the HRG, but also simplify the circuits. It is shown that, by using these methods, the tracking frequency accuracy could reach 0.002Hz by the test and analysis, which could improve the control circuit accuracy of the HRG significantly
查看全文  查看/发表评论  下载PDF阅读器